Worm travel gearbox with motor
worm motor
A robust worm-get gearbox powered by an MM28 engine. Ideal applications where a simple to fit, high torque productivity is required. Ideal for student based projects which includes robots and buggies.
The unit has been designed so that the output shaft can be ‘clicked’ in and out for modification. E.g. cutting down to size. The electric motor is snap fitted into its cradle to engage the gear and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine is not turning. The high gear ratios of 216:1 or 336:1 make this gearbox appropriate for small strolling robots, lifting mechanisms, and various other applications where huge torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to some amps, making them ideal applicants for the DRV8833 motor driver carrier. Motor overheating can be due to excessive stalling, actually at suprisingly low voltages. We advise that you utilize stall-detection sensors, or simply view your robot, to ensure that it doesn’t stall for more than a few seconds at a time.
This gearbox includes a 4 mm diameter, round output shaft, which works together with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also matches on the smaller threaded end of the shaft, although it is not especially designed to work with this kind of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors happen to be economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right position worm geared motors arranged new criteria for reliability, effectiveness and economic climate with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly style offers easy integration now and a truly future proof remedy. The Ever-Power gear electric motor offers total flexibility in mounting options includes shaft, base, face, and flange solutions. The electric motor terminal box can be mounted in alternate positions rotated in 90º steps around the motor frame providing for unparalleled integration opportunities.
Ever-Power gear motors adhere to North American and International requirements, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a true total remedy for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose proof,and can be used outdoors or in wet and dusty environments without the use of additional enclosures. Complete rated output is offered by the result shaft of the machine.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With built-in inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the solution for applications requiring a good corner turn, optional dual output, or an inability for the engine to be back driven. The DC right angle equipment motors are made for continuous and intermittent duty operation. Our right angle equipment reducers are designed with a number of mounting plate options, making them well suited for a variety of DC engine based applications. We offer 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ hours (varies by application)
EP Products Worm Gear Motors are made to generate high torque in a small package size. Worm Gear Motors are excellent for applications that want a personal- locking or breaking feature since the output shaft can’t rotate when there’s no power used. Also, Worm Gearheads can transfer movement in 90 degrees. With various reduction ratios, precision cut gears, voltages and sizes, EP Items includes a DC Worm Gear Motor solution for your application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Systems / Security Gates / Dental care Chairs / Ambulance Cots & Stretchers Many of our DC Motors can be complimented with one of our Worm Gearheads. EP Products will continue to work with you to design and manufacture a Worm Gear Engine that will optimize the overall performance of your specific application.
Built to your unique requirements
Motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Slash / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm motor runs on the metal gear box for sturdiness and a high torque output. Due to the special mechanical framework of the worm drive the motor output shaft is self locking and can not be rotated.
This part runs on the two wire connection and supports direction control in addition to PWM speed control. Rated voltage is 12v and can obtain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear systems from EP DRIVESYSTEMS especially show their power in applications where large gear ratios are necessary. Our worm geared motors are as a result optimally suited for use in intralogistics, packaging technology and the meals & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions allow simple and effective cleaning of the drive system.
Corrosion protection
The NSD tupH sealed surface conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular style give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are numerous applications that require drive systems, and each one of these has its unique requirements. The EP series worm equipment motors could be quickly and efficiently adapted to meet your needs.
Worm gear units impress with their great power density and small style. If required, we are able to also source them with the highly effective nsd tupH surface treatment.
In addition to the basic EP casing, we offer an extensive line of bolt-on parts to customize the merchandise including torque arms, shaft addresses and output flanges. These can be easily field set up, but we will also be glad to assemble the average person components for you.
Discover more about our modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm equipment unit SMI
SMI worm gear devices feature a simple, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface area conversion makes the product ideally suited for harsh and challenging industries like food processing and pharmaceuticals.
Flexible input designs such as for example NEMA, IEC or direct motor mounts in extra foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units possess on all sides several fixing possibilities and enable a simple assembling for the client.
Other drive configurationscan be created by use of built-on accessories (e.g. torque arm and output flanges). The housings are made in light weight building out of aluminium die cast. Electric motor attachment is realised in general by means of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Motor – incorporating the next features: 1 to 6V voltage rating, 17100 rpm no load velocity, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm vast, 40mm high, a good robust worm get gearbox powered by an MM28 electric motor (included), most ideal for applications where a simple to match, high torque outcome is required, nylon housing and equipment, requires light oil or perhaps silicon grease lubrication, well suited for student based tasks including robots and buggies.
Most ideal for applications where a simple to fit, high torque end result is required
Ideal for student based projects including robots and buggies
Reversible Great torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible Large torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to improve motor rotation.
Turbo worm geared electric motor with self-lock, that’s, in the case of motor without electrical, the end result axis is usually fixed, self-lock.
The reducer output shaft arranged vertically with the electric motor shaft, whole engine output shaft relatively-short than general gear electric motor, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windows, door, Mini winch. Ect.
In sumo robot or combat robot competition where great holding torque’s electric motor is essential in order to avoid your robot being pushed by your opponent robot. The worm gear is definitely a better option when compared to spur gear motor. How come worm gear so unique? Check this wiki out: Worm Drive.
“Unlike with ordinary gear trains, the path of transmission (input shaft vs output shaft) is not reversible when using large reduction ratios, because of the increased friction involved between the worm and worm-wheel, when usually a single start (a single spiral) worm is used. This is normally a advantage when it’s desired to get rid of any possibility of the output driving the input.”
In other words, it is difficult to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g