China Custom Industry Transmission Worm Gear Series Double Enveloping Worm Gearbox sequential gearbox

Product Description

Industry Transmission Worm Gear Series  Double Enveloping Worm Gearbox

Product Description
Series C  double enveloping worm gear
Model: 100 – 500
Ratio: 10 -63
Output Torque : 683 – 51180 N.m
Rating Power : 47/25HP(1.41Kw) – 597HP(448Kw)

 

Working conditions

Two shafts for 90 ° Intersect, input speed must not be more than 1500 rpm.The working environment temperature should range from  0 ~ 40 ° C, when the environment temperature below 0 ° C or above 40 ° C.Before starting the lubricating oil to corresponding heating and cooling, The worm shafts, reverse operation can be positive.

Data sheet on CUW double enveloping worm gear reducer :

Model ShaftDia. (mm) Center Height (CUW) (CUW) Output shaft Dia. Power Ratio Permitted Torque Weight
(CUW) input Solid(h6) (mm) (mm) (kw) (Nm) (KGS)
100 28 190 48 1.41~11.5 10 .25~ 62 683-1094 42
125 32 225 55 2.42~19.7 10 .25 ~ 62 1170~2221 65
140 38 255 65 3.94~25.9 10 .25 ~ 62 1555 ~ 3473 85
160 42 290 70 4.39~35.7 10 .25 ~ 62 2143 ~4212 120
180 48 320 80 5.83~47.5 10 .25 ~ 62 2812 ~ 5387 170
200 55 350 90 7.52 ~61.2 10 .25 ~ 62 3624 ~6859 220
225 60 390 100 9.9~81.4 10 .25 ~ 62 4872 ~ 9224 290
250 65 430 110 12.9 ~105 10 .25~ 62 6284~11892 380
280 70 480 120 16.9 ~ 138 10 .25 ~ 62 8347 ~ 15820 520
315 75 530 140 22.5 ~183 10 .25 ~ 62 11068~ 19450 700
355 80 595 150 30~245 10 .25 ~ 62 14818 ~28014  1030
400 90 660 170 32.1 ~261 10 .25 ~ 62 15786~29918 1400
450 100 740 190 42.6 ~347 10 .25 ~ 62 2571~39881 1980
500 110 815 210 54.9 ~ 448 10 .25 ~ 62 27097~51180 270

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step
Samples:
US$ 2000/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

worm gearbox

How to Install and Align a Worm Reducer Properly

Proper installation and alignment of a worm reducer are crucial for ensuring optimal performance and longevity. Follow these steps to install and align a worm reducer:

  1. Preparation: Gather all the necessary tools, equipment, and safety gear before starting the installation process.
  2. Positioning: Place the worm reducer in the desired location, ensuring that it is securely mounted to a stable surface. Use appropriate fasteners and mounting brackets as needed.
  3. Shaft Alignment: Check the alignment of the input and output shafts. Use precision measurement tools to ensure that the shafts are parallel and in line with each other.
  4. Base Plate Alignment: Align the base plate of the reducer with the foundation or mounting surface. Ensure that the base plate is level and properly aligned before securing it in place.
  5. Bolt Tightening: Gradually and evenly tighten the mounting bolts to the manufacturer’s specifications. This helps ensure proper contact between the reducer and the mounting surface.
  6. Check for Clearance: Verify that there is enough clearance for any rotating components or parts that may move during operation. Avoid any interference that could cause damage or performance issues.
  7. Lubrication: Apply the recommended lubricant to the worm reducer according to the manufacturer’s guidelines. Proper lubrication is essential for smooth operation and reducing friction.
  8. Alignment Testing: After installation, run the worm reducer briefly without a load to check for any unusual noises, vibrations, or misalignment issues.
  9. Load Testing: Gradually introduce the intended load to the worm reducer and monitor its performance. Ensure that the reducer operates smoothly and efficiently under the load conditions.

It’s important to refer to the manufacturer’s installation guidelines and specifications for your specific worm reducer model. Proper installation and alignment will contribute to the gearbox’s reliability, efficiency, and overall functionality.

worm gearbox

Does a Worm Reducer Require Frequent Maintenance?

Worm reducers generally require less frequent maintenance compared to some other types of gearboxes due to their design and operating characteristics. However, maintenance is still essential to ensure optimal performance and longevity. Here are some key points to consider:

  • Lubrication: Proper lubrication is crucial for worm gearboxes. Regularly check the lubricant level and quality to prevent wear and overheating. Lubricant should be changed as recommended by the manufacturer.
  • Inspections: Periodically inspect the gearbox for signs of wear, damage, or oil leaks. Check for any unusual noises, vibrations, or changes in performance that could indicate a problem.
  • Tightening and Alignment: Check and tighten any loose fasteners and ensure that the gearbox is properly aligned. Misalignment can lead to increased wear and reduced efficiency.
  • Seal Maintenance: Inspect and maintain seals to prevent oil leakage and contaminants from entering the gearbox.
  • Cleaning: Keep the gearbox clean from debris and contaminants that could affect its performance. Regular cleaning can prevent premature wear and damage.
  • Load and Speed: Ensure that the gearbox is operating within its rated load and speed limits. Exceeding these limits can lead to accelerated wear and potential failure.
  • Environmental Conditions: Consider the operating environment of the gearbox. Extreme temperatures, humidity, and other factors can impact the gearbox’s performance and longevity.

While worm gearboxes are known for their durability and self-locking feature, neglecting maintenance can lead to premature wear, reduced efficiency, and potential breakdowns. Following the manufacturer’s recommendations for maintenance intervals and procedures is essential to keep the worm reducer in optimal condition.

worm gearbox

Types of Worm Gear Configurations and Their Uses

Worm gear configurations vary based on the arrangement of the worm and the gear it engages with. Here are common types and their applications:

  • Single Enveloping Worm Gear: This configuration offers high torque transmission and efficiency. It’s used in heavy-duty applications like mining equipment and industrial machinery.
  • Double Enveloping Worm Gear: With increased contact area, this type provides higher load capacity and improved efficiency. It’s used in aerospace applications, robotics, and precision machinery.
  • Non-Throated Worm Gear: This type has a cylindrical worm without a throat. It’s suitable for applications requiring precise motion control, such as CNC machines and robotics.
  • Throated Worm Gear: Featuring a throat in the worm, this configuration offers smooth engagement and higher load capacity. It’s used in conveyors, elevators, and automotive applications.
  • Non-Modular Worm Gear: In this design, the worm and gear are a matched set, resulting in better meshing and efficiency. It’s utilized in various industries where customization is essential.
  • Modular Worm Gear: This type allows interchangeability of worm and gear components, providing flexibility in design and maintenance. It’s commonly used in conveyors, mixers, and material handling systems.

Selecting the appropriate worm gear configuration depends on factors such as load capacity, efficiency, precision, and application requirements. Consulting gearbox experts can help determine the best configuration for your specific needs.

China Custom Industry Transmission Worm Gear Series Double Enveloping Worm Gearbox   sequential gearbox	China Custom Industry Transmission Worm Gear Series Double Enveloping Worm Gearbox   sequential gearbox
editor by CX 2024-03-08