China supplier Manual Override Worm Gearbox for Pneumatic Valve planetary gearbox

Product Description

Description

 

HDM De-clutchable wormgear offers simple and reliable manual positioning of the valves, dampers and other quarter-turn devices when overriding existing pneumatic, electric or hydraulic quarter-turn actuators. All unit are suitable for both indoor and outdoor installation. The modular design is to provide the most efficient and effective solution to a full range of manual overriding requirements.

Main Product features
 

To engage manual operation, first pull out the lock handle and then rotate the clutch lever in anti-clockwise direction until engagement takes place. To return to automatic mode, first pull out the lock handle and then rotate the clutch lever in clockwise.

Remark:The bottom center of the HDM-4 is either F10/F14 or F10/F12

 

 

New Manual Override Countershaft Valve Connection Actuator Connection
b1 N b2 M D1 4-M1 D2 4-M2 E D3 4-Φ1 D4 4-Φ2
HDM-1 14 22 14 16 Φ50 4-M6 Φ70 4-M8 70*70 Φ50 4-Φ6.5 Φ70 4-Φ8.5
HDM-2 17 22 17 18 Φ70 4-M8 Φ102 4-M10 95*95 Φ70 4-Φ8.5 Φ102 4-Φ10.5
HDM-3 22 28 22 22 Φ102 4-M10 Φ125 4-M12 114*114 Φ102 4-Φ10.5 Φ125 4-Φ12.5
HDM-4 27 32 27 30 Φ102 4-M10 Φ125 4-M12 129*129 Φ125 4-Φ12.5 Φ140 4-Φ16.5
HDM-5 36 45 36 38 Φ140 4-M16 / / 156*156 Φ140 4-Φ17 Φ165 4-Φ21
HDM-6 46 50 46 48 Φ165 4-M20 / / 160*160 Φ165 4-Φ22 / /

New Manual Override A B ΦC F T Y H S K Ratio Rated Input Rated Onput
HDM-1 90 55 Φ88 115 44 145 120 53 10 26:1 Nm 250Nm
HDM-2 125 64 Φ110 135 62.5 178 133 56.5 13 28:1 Nm 450Nm
HDM-3 140 71 Φ129 166 70 212 180 68.7 12.5 38:1 Nm 700Nm
HDM-4 188.5 93 Φ174 202 94 280 195 84 15 54:1 Nm 1200Nm
HDM-5 222 110 Φ205 245 110 315 225 92 15 80:1 Nm 2000Nm
HDM-6 252 120 Φ275 280 125 320 252 102 15 78:1 Nm 3000Nm

1.  Question:What is your main products?

   Answer:Our main products are Pneumatic Actuators, Electric Actuators, Actuated Valves And Valve actuators Accessories..
 

2. Question:Are you a trader or manufacturer ?

   Answer: We are the pneumatic actuators and electric actuators manufacturer , we have ability to do the customization products with experienced team, And we have own factory and production line.
 

3. Question:How do your make the quality guarantee for actuators?

   Answer:We have our own quality control system for incoming and outgoing of the materials, every product will be under controlled and tested before delivery to our customer , and we also provide 18 months guarantee ,beside we provide technical supporting .

4.  Question:When can I receive the Price of valve actuators ?

   Answer:We will give the Quotation Within 24 hours after we get your inquiry .Or Your can call or message us if it’s quite urgently.
 

5. Question:How to order our pneumatic actuators and electric actuators ?

   Answer:Please send us your inquiry by Email, , etc. we need to know the following informations before giving the formal Quotation.
1) Product information in details, Quantity, Other requirements
2) Delivery time required
 

6. Question:How can I get a sample to check your quality?

   Answer:Contact with our sales expert to arrange the sample delivery. Please send us the details of the sample before placing the order.
 

7. Question:Shall we pay the sample cost and transportation cost ?

   Answer:We will provide the sample by free of charge. Your will bear the freight cost.
 

8. Question:How long to prepare the sample ?

   Answer:Most of our products are under regular production and some of them we keep in stocks.
 

9. Question:How to delivery the sample to our place?

   Answer:Your can provide your forwarders contacts if any, or we will arrange it for you.
 

10. Question:What about the delivery date if we place the formal order ?

   Answer:Usually it takes 15~20days on the production .We know that on-time delivery is very crucial to our customers to meet dead-lines.
We monitor and expedite our supply chain to ensure that we delivery our products to our customers on-time all the time. /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor
Function: Change Drive Direction, Speed Changing
Layout: Coaxial
Hardness: Soft Tooth Surface
Installation: Torque Arm Type
Step: Double-Step
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

worm gearbox

How to Install and Align a Worm Reducer Properly

Proper installation and alignment of a worm reducer are crucial for ensuring optimal performance and longevity. Follow these steps to install and align a worm reducer:

  1. Preparation: Gather all the necessary tools, equipment, and safety gear before starting the installation process.
  2. Positioning: Place the worm reducer in the desired location, ensuring that it is securely mounted to a stable surface. Use appropriate fasteners and mounting brackets as needed.
  3. Shaft Alignment: Check the alignment of the input and output shafts. Use precision measurement tools to ensure that the shafts are parallel and in line with each other.
  4. Base Plate Alignment: Align the base plate of the reducer with the foundation or mounting surface. Ensure that the base plate is level and properly aligned before securing it in place.
  5. Bolt Tightening: Gradually and evenly tighten the mounting bolts to the manufacturer’s specifications. This helps ensure proper contact between the reducer and the mounting surface.
  6. Check for Clearance: Verify that there is enough clearance for any rotating components or parts that may move during operation. Avoid any interference that could cause damage or performance issues.
  7. Lubrication: Apply the recommended lubricant to the worm reducer according to the manufacturer’s guidelines. Proper lubrication is essential for smooth operation and reducing friction.
  8. Alignment Testing: After installation, run the worm reducer briefly without a load to check for any unusual noises, vibrations, or misalignment issues.
  9. Load Testing: Gradually introduce the intended load to the worm reducer and monitor its performance. Ensure that the reducer operates smoothly and efficiently under the load conditions.

It’s important to refer to the manufacturer’s installation guidelines and specifications for your specific worm reducer model. Proper installation and alignment will contribute to the gearbox’s reliability, efficiency, and overall functionality.

worm gearbox

Worm Gearbox vs. Helical Gearbox: A Comparison

Worm gearboxes and helical gearboxes are two popular types of gear systems, each with its own set of advantages and disadvantages. Let’s compare them:

Aspect Worm Gearbox Helical Gearbox
Efficiency Lower efficiency due to sliding friction between the worm and worm wheel. Higher efficiency due to rolling contact between helical gear teeth.
Torque Transmission Excellent torque transmission and high reduction ratios achievable in a single stage. Good torque transmission, but may require multiple stages for high reduction ratios.
Noise and Vibration Generally higher noise and vibration levels due to sliding action. Lower noise and vibration levels due to smoother rolling contact.
Backlash Higher inherent backlash due to the design. Lower backlash due to meshing of helical teeth.
Efficiency at Higher Speeds Less suitable for high-speed applications due to efficiency loss. More suitable for high-speed applications due to higher efficiency.
Overload Protection Natural self-locking feature provides some overload protection. May not have the same level of inherent overload protection.
Applications Commonly used for applications requiring high reduction ratios, such as conveyor systems and heavy-duty machinery. Widely used in various applications including automotive transmissions, industrial machinery, and more.

Both worm and helical gearboxes have their place in engineering, and the choice between them depends on the specific requirements of the application. Worm gearboxes are preferred for applications with high reduction ratios, while helical gearboxes are chosen for their higher efficiency and smoother operation.

worm gearbox

How to Select the Right Worm Gearbox for Your Application

Selecting the right worm gearbox for your application involves careful consideration of various factors:

  • Load Requirements: Determine the torque and load requirements of your application to ensure the selected gearbox can handle the load without compromising performance.
  • Speed Reduction: Calculate the required gear reduction ratio to achieve the desired output speed. Worm gearboxes are known for high reduction ratios.
  • Efficiency: Consider the gearbox’s efficiency, as worm gearboxes typically have lower efficiency due to the sliding action. Evaluate whether the efficiency meets your application’s needs.
  • Space Constraints: Assess the available space for the gearbox. Worm gearboxes have a compact design, making them suitable for applications with limited space.
  • Mounting Options: Determine the mounting orientation and configuration that best suits your application.
  • Operating Environment: Consider factors such as temperature, humidity, and exposure to contaminants. Choose a gearbox with appropriate seals and materials to withstand the environment.
  • Backlash: Evaluate the acceptable level of backlash in your application. Worm gearboxes may exhibit more backlash compared to other gear types.
  • Self-Locking: If self-locking capability is required, confirm that the selected gearbox can prevent reverse motion without the need for external braking mechanisms.
  • Maintenance: Consider the maintenance requirements of the gearbox. Some worm gearboxes require periodic lubrication and maintenance to ensure proper functioning.
  • Cost: Balance the features and performance of the gearbox with the overall cost to ensure it aligns with your budget.

Consult with gearbox manufacturers or experts to get recommendations tailored to your specific application. Testing and simulations can also help validate the suitability of a particular gearbox for your needs.

China supplier Manual Override Worm Gearbox for Pneumatic Valve   planetary gearbox	China supplier Manual Override Worm Gearbox for Pneumatic Valve   planetary gearbox
editor by CX 2024-02-26