worm reduction

Our regular 700 Series – the heart of Ever-Power speed reducer products – has been serving industry reliably for over 10 years. Its proven modular design has set the industry standard for performance and may be the most imitated product in the current worm gear rate reducer market. But why settle for a knock-off when you’re able to have the original – from Ever-Power.
Specifications
11 basic single reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting flexibility permits installation in practically any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for maximum durability, along with greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings can be found in our eCatalog.
Ever-Power worm gearboxes possess earned a popularity to be an industry benchmark worldwide. Our success came from our relentless drive for quality with state-of-the-artwork technology, all and will be offering worm gearboxes are affordable prices. High flexibility accorded through a wide choice of mounting choices, shaft configurations and electric motor interfaces, makes the Ever-Power worm gearbox the default choice for the industry. The helical-worm and the double-worm edition, with or without the torque limiter, add up to the advantage, creating an extremely versatile drive system.
Ever-Power Worm gearboxes provide high torque with low swiftness gear ratio. Being simple and compact in style, these gears can perform higher gear ratio compared to the helical gears. These worm decrease gears having screw type qualities are similar to helical gears, but its helix angle is typically comparatively bigger) and its body is normally quite long in the axial path. The gears in these gearboxes could be right or left-handed dependant on the purpose.
Mounting option include universal housing, side flanges, foot (horizontal and vertical), shaft mounted with torque arm. Obtainable in Solid shafts (solitary or double), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a kind of interlocking gear composed of a worm shaft and worm wheel. The worm is definitely shaped such as a screw and the worm wheel is certainly a type of gear machined to possess a tooth profile with the same configuration.
The operation of a worm gear is similar with that of a bolt and nut. The principle is equivalent to a nut that has been fixed so that it cannot rotate and for that reason progresses in the axial direction when the bolt is definitely turned.
The design of a worm gear is thought of through the relationship between your rack and spur gear on the middle plane of the worm wheel.
Features
High reduction ratio One rotation of the worm rotates the worm wheel simply by one tooth. Due to this, in a 1 speed decrease gears, the wheel could be manufactured so that it’ll be rotated 1/60 (1/120 in special applications).
Orthogonal shaft The shafts are aligned orthogonally due to the structure. This feature makes it possible to layout the turning tranny direction at the right angle.
The arbitrariness of the rotation direction The screw direction of the worm can be clockwise or counterclockwise (generally clockwise). You’ll be able to change the rotation direction of the worm wheel by changing the screw path.
A wide variety of shaft layouts The wide selection of shaft layouts is one of the top features of interlocking gears.For instance, right shaft output, left shaft output, dual shaft input and dual shaft output, etc., combine for a total of 14 types (Figure 2) and, if attachment orientations are included, you’ll be able to pick from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel is certainly characteristic since the contact is certainly linear and the relative slide is fantastic. In comparison to rolling power transmission, sound and vibration are extremely low. For this reason, this technology is utilized to drive medical devices, elevators and escalators, etc.
The principal specifications of worm reduction gears
MA Series(Small)
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1~1(at an input of 1800 rpm)
Output torque(N・m) 20~66
Input speed(rpm) 0~1800
MA Series(Medium)
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4~30(at an input of 1800 rpm)
Output torque(N・m) 900~3570
Input speed(rpm) 0~1800
S Series
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3~255(at an input of 1800 rpm)
Output torque(N・m) 50~56600
Input speed(rpm) 0~1800
Key points when choosing a worm reduction gears
Selection
When choosing a worm reduction gears, the procedures for selecting the correct gear are described in the maker catalogs and the series and models should be selected according to those procedures. Particular care should be taken in crucial areas such as for example selecting the load index, calculating the overhang load and examining heat rated capability from the manufacturer.
Cautions during use
When using a worm reduction gears, heat produced through the initial period of use is high and running-in operation at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is paramount to sufficiently achieving the performance of the worm reduction gears.
Maintenance and inspection
After completing running-in procedure (approximately 50 hours), it is necessary to improve the lubricating oil and to change the lubricating oil from then on about 1 time per year according to the procedure manual supplied by the manufacturer.
Product Description
The Worm Decrease Gear Box is provided by our company is of high-quality. Our products are made through the use of premium quality material and advance technology at our vendors end. These are widely used in various sectors. Our items are easily available at a very low market prices.
Motor Mount Frame Options
TEC Motors, worm reduction gearbox.
Option A-160 B5 Framework, Flange Mount.
Choice B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Install.
High efficiency and safe operation. High load capacity and overload functions. Result Torque = (Power (kW) x 9550 (Constant))/ Gearbox output speed (rpm).
Higher ratios available on request reliant on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are milestones for the market worldwide. They succeeded in combining uncompromising quality with stateoftheart technology amd renown cost effectiveness.Absolute versatility is distributed by the wide selection of several installation options, shaft configurations and electric motor interface, all offered as regular. The helicalworm and the doubleworm version, with or without the torque limiter, also accumulate, creating an extremely versatile drive system.
ADDITIONAL INFORMATION
AMP
0.42 A
EFFICIENCY
84%
HP
0.12
KW
0.09
RATIO
7
RPM
200
TEMPERATURE RATING
20 degree C TO 80 level C
TORQUE
4 Nm
HSN
8483.40.00
WARRANTY PERIOD
12 Months
The worm reduction gears can be found in two series: X and H.
The series X, having a worm and worm wheel set, is available in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell casing + coupling) offers great versatility to suit a broad range of applications and higher efficiency than the compact line XC, where in fact the emphasis is on space efficiency.
Series H offers the same features since series X with an extra plus: a spur equipment pre-stage at the insight end provides higher overall performance and a broader range of ratios compared to the X series.
Frame sizes 110 and 90 include a cast-iron housing cast enbloc, whereas smaller sizes make use of die-cast aluminium housings. The worm shaft is manufactured from casehardened and hardened alloy steel and ground-finished.
The worm wheel has a cast iron hub with cast bronze insert. Hollow result shaft comes as standard.
Broad range of options available:
second input, output flange, single or dual extension output shaft, torque limiter with through cable, torque arm.